Re: Actiontec PC Card Modem on Sony VAIO Laptop

["Dom De Vitto" <dom_(_at_)_DeVitto_(_dot_)_com>]

People are bound to say this, but GENERIC with stuff removed is not
GENERIC...

Try it with stock GENERIC, or as close to that as boots up (posting
the diffs from GENERIC) and ask here again.

Dom
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Dom De Vitto                                       Tel. 07855 805 271
http://www.devitto.com                         mailto:dom_(_at_)_devitto_(_dot_)_com
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

 


-----Original Message-----
From: owner-misc_(_at_)_openbsd_(_dot_)_org [mailto:owner-misc_(_at_)_openbsd_(_dot_)_org] On Behalf
Of John R. Shannon
Sent: Wednesday, February 26, 2003 11:51 AM
To: misc_(_at_)_openbsd_(_dot_)_org
Subject: Actiontec PC Card Modem on Sony VAIO Laptop


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

OpenBSD 3.3 Beta (1 day old CURRENT)
Dmesg output at end of message

This modem is a hardware based on the Lucent Chipset and is suppossed to
be 
Linux compatible. 

Whenever I access the device, the system locks completely. For example:

     cu -l /dev/tty00

should (I believe) connect to the modem directly and let me issue AT
commands. 
Instead, it completely locks up the machine.

Any suggestions?


dmesg (KERNEL is GENERIC with non-present devices commented out - no
other 
changes):

OpenBSD 3.3-beta (KERNEL) #3: Tue Feb 25 08:54:16 MST 2003
    root_(_at_)_laptop_(_dot_)_johnrshannon_(_dot_)_com:/usr/src/sys/arch/i386/compile/KERNEL
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 1.99 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SIMD,3DNOW
real mem  = 267427840 (261160K)
avail mem = 243777536 (238064K)
using 3290 buffers containing 13475840 bytes (13160K) of memory mainbus0
(root) bios0 at mainbus0: AT/286+(3f) BIOS, date 12/03/02, BIOS32 rev. 0
@ 0xfd890 apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev
0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000! pci0 at
mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0
function 0 "Intel 82845 Host" rev 0x04 ppb0 at pci0 dev 1 function 0
"Intel 82845 AGP" rev 0x04 pci1 at ppb0 bus 1 vga0 at pci1 dev 0
function 0 "ATI Radeon Mobility M7 LW" rev 0x00 wsdisplay0 at vga0:
console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0 uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb1 at uhci1: USB revision 1.0 uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev
0x02pci_intr_map: 
no mapping for pin C
: couldn't map interrupt
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42 pci2
at ppb1 bus 2 cbb0 at pci2 dev 5 function 0 "Ricoh 5C476 PCI-CardBus"
rev 0xa8: irq 3 cbb1 at pci2 dev 5 function 1 "Ricoh 5C476 PCI-CardBus"
rev 0xa8pci_intr_map: 
no mapping for pin B
: couldn't map interrupt
vendor "Ricoh", unknown product 0x552 (class serial bus, subclass
Firewire, 
rev 0x00) at pci2 dev 5 function 2 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42: irq 9,
address 
08:00:46:82:1d:e1
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0 cardslot0
at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline
0x0, lattimer 0x20 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0
"Intel 82801CAM LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel
82801CAM IDE" rev 0x02: DMA, channel 
0 configured to compatibility, channel 1 configured to compatibility wd0
at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: 16-sector PIO, LBA, 38154MB, 16383 cyl, 16 head, 63 sec, 78140160
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA740 DVD/CDRW, 1.00> SCSI0
5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMB" rev 0x02 at pci0 dev 31 function 3 not
configured auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97
Audio" rev 0x02: irq 
9, ICH3 AC97
ac97: codec id 0x594d4803 (Yamaha <03>)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not
configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask c208 netmask c208 ttymask d20a
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Agiler 3D USB Mouse, rev 1.00/5.00, addr 2, iclass 3/1 ums0 at
uhidev0: 5 buttons and Z dir. wsmouse1 at ums0 mux 0 pccom0 at pcmcia0
function 0 "PCMCIA  , 56K V.90 Fax Modem (LK) , FM560LK  " 
port 0xa3f8/8: ns16450, no fifo



- -- 

John R. Shannon
john_(_at_)_johnrshannon_(_dot_)_com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)

iEYEARECAAYFAj5cqjEACgkQOKbCxya4HYsE/ACglhbo+Zq8gddCjvdNQhA9N6/T
mAAAoKgynlg5DkJIUT79QP/l/yjasGhE
=bhLI
-----END PGP SIGNATURE-----