Actiontec PC Card Modem on Sony VAIO Laptop (RESUBMIT with GENRIC KERNEL)

["John R. Shannon" <john_(_at_)_johnrshannon_(_dot_)_com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

OpenBSD laptop.johnrshannon.com 3.3 GENERIC#0 i386
Dmesg output at end of message

This modem is a hardware based on the Lucent Chipset and is suppossed to be
Linux compatible.

Whenever I access the device, the system locks completely. For example:

     cu -l /dev/tty00

should (I believe) connect to the modem directly and let me issue AT commands.
Instead, it completely locks up the machine.

Any suggestions?


dmesg:

OpenBSD 3.3-beta (GENERIC) #0: Mon Feb 24 16:11:18 MST 2003
    root_(_at_)_laptop_(_dot_)_johnrshannon_(_dot_)_com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 1.99 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD,3DNOW
real mem  = 267427840 (261160K)
avail mem = 240275456 (234644K)
using 3290 buffers containing 13475840 bytes (13160K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(3f) BIOS, date 12/03/02, BIOS32 rev. 0 @ 0xfd890
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02pci_intr_map: 
no mapping for pin C
: couldn't map interrupt
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
cbb0 at pci2 dev 5 function 0 "Ricoh 5C476 PCI-CardBus" rev 0xa8: irq 3
cbb1 at pci2 dev 5 function 1 "Ricoh 5C476 PCI-CardBus" rev 0xa8pci_intr_map: 
no mapping for pin B
: couldn't map interrupt
vendor "Ricoh", unknown product 0x552 (class serial bus, subclass Firewire, 
rev 0x00) at pci2 dev 5 function 2 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42: irq 9, address 
08:00:46:82:1d:e1
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: 16-sector PIO, LBA, 38154MB, 16383 cyl, 16 head, 63 sec, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA740 DVD/CDRW, 1.00> SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMB" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97 Audio" rev 0x02: irq 
9, ICH3 AC97
ac97: codec id 0x594d4803 (Yamaha <03>)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask c208 netmask c208 ttymask d20a
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
pccom3 at pcmcia0 function 0 "PCMCIA  , 56K V.90 Fax Modem (LK) , FM560LK  " 
port 0xa3f8/8: ns16450, no fifo
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Agiler 3D USB Mouse, rev 1.00/5.00, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0



- --

John R. Shannon
john_(_at_)_johnrshannon_(_dot_)_com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)

iEYEARECAAYFAj5cr2EACgkQOKbCxya4HYt4AACcDOTFTHmy+png6TaaJM6KgUVp
WYEAn1VBRgBYXxjNDxycn4tKRaIZcPhF
=VO5z
-----END PGP SIGNATURE-----